Device Id - Securitytec DS-8004HCI-S User Manual

MAC address:
This MAC address is not the address of DVR. It is the MAC address of the PC that will
access the DVR. If the MAC address is set to all zeros the user may connect to the DVR
from any remote PC. If you setup this MAC address, only the PC with this MAC address
can access the DVR using that user name and password.
At PC end, in the DOS prompt, you can use the ―ipconfig‖ command to see the PC MAC
address.
6.2

Device ID

The device ID is a unique identifier for the DVR. When you use an IR Remote controller to
operate DVR, you must use this device ID to select the DVR. The default device ID is ―88‖.
If there is more than one DVR in one place, define a different device ID for each DVR.
Otherwise, the IR controller will control all DVRs with the same device ID at the same
time.
1. In ―Display‖ menu, select the device ID edit box.
2. Use the numeric keys to input a new device ID. The device ID value is ranged
from 01-255.
3. Press the ―Confirm‖ button to save the new ID, or ―Cancel‖ to abort.
73