Table of Contents
Advertisement
4.2
Live View
At startup, the DVR will enter the live view mode. On the live display you will see the
date/time, camera name and camera/alarm status line in addition to the video from
attached (and configured) cameras. The information in the status line is described later in
this manual. You can easily toggle the status line on/off by right clicking the mouse and
selecting ―Show‖ or ―Close‖ status, or press the ―A‖ key on the DVR front panel or IR
Remote.
On the live screen, you will see date, time, camera names and camera status icons.
Note: To set the system date and time in ―Display‖ menu, refer to section 6.4. To change
camera names in the ―Image‖ menu, refer to section 6.5.
See the following chart for camera record status indications:
Icon
Icon Color
Status Description
White
No video signal
Yellow
Video input
Pink
Manual recording
Green
Continuous recording
44
Advertisement
Table of Contents
