Table of Contents
Advertisement
4.5
Manual Record
Note: In order to perform this function the DVR must have drives installed and formatted
and the user login password must have ―Record‖ enabled.Manual record will lose effective
after reboot.
Manual record:
1. In the live view mode, press the [REC] key. In the pop-up login dialog, select a
user name and input the correct password to enter into the ―Manual Record‖
interface.
2. In menu mode, press [REC] to enter the ―Manual Record‖ interface directly.
Manual Record Menu:
The Manual Record interface has the following selections: Channel number, channel
status, start/stop record, start all and stop all buttons.
1. Channel: Indicates available camera inputs.
2. Status: Indicates one of four settings:
is recording (or set to record including: Continuous recording, alarm recording,
motion detection recording). Red means network transmission. Orange means
means idle. Green means the channel
50
Advertisement
Table of Contents
