Sequence Setup - Securitytec DS-8004HCI-S User Manual

6.14.5

Sequence Setup

Each sequence is made up of several preset positions. Each preset point includes a
preset number, dwell time and dwell speed. Please make sure the PTZ you are using can
support the sequence function before you start the setup. You can save 16 sequences.
1. In ―PTZ‖ menu, select ―Setup‖ on the right side of ―Sequence No‖ to enter the
―Sequence‖ setup menu:
2. In the ―Sequence‖ setup menu, first input the sequence number (1 – 16). Each
sequence is made up of a series of preset positions. Each ―sequence‖ includes
the preset number, dwell time (how long it will stah in each position) and dwell
speed (how long it takes to move to the next sequence position). Press the ―Add‖
button to add a preset point.
3. Press ―Confirm‖ button to save the cruise point into the sequence.
4. After you finish the setup the sequence numbers, press ―StartSeq‖ to check the
current sequence. Press ―StopSeq‖ button to stop checking.
5. After you finish sequence setup, press ―ESC‖ to return to the ―PTZ‖ menu. In
―PTZ‖ menu, press ―Confirm‖ to save the modification.
Please make sure the PTZ you are using can support the sequence function.
109