View Tampering Alarm - Securitytec DS-8004HCI-S User Manual

6.7

View Tampering Alarm

With this function enabled, an alarm will be produced when the camera view is blocked.
1. Enter the ―Camera Input Adjustment‖ menu.
2. Select a camera: Use [] [] keys to select a camera.
3. Reach the list dialog box next to ―View Tampering‖.
4. Sensitivity Selection: Use the [] [] keys to select the sensitivity level. The
sensitivity options are: Low, Normal and High. Selecting one of them will active
the ―Area Setup‖ and ―Policy Setup‖ functions.
5. View tampering area setup: Move the ―Active Window‖ to the ―Area‖ button and
press [ENTER] to enter the area setup interface. The setup methods are the
same as those used for the mask area setup.
6. After setting up the area, press [ENTER] to return to the ―Image Setup‖ menu, or
[ESC] to abort.
Note: Only one view tampering area can be setup per camera.
83