Powering Down The Dvr - Securitytec DS-8004HCI-S User Manual

4.8

Powering Down the DVR

Note: Turning off the power switch on the rear panel, or pulling the power cord from the
unit is not recommended in order to avoid corrupting data on the disk drives. The safer
method is to enter the Menu and turn off the power using the Utilities Menu. Alternately
you can press and hold the front panel Power key (or, the IR Remote Power key) for five
seconds.
Shutting down the DVR:
Using the menu:
1. Enter the ―Utilities‖ menu. (Main, Utilities).
2. Move the ―Active Window‖ to ―Power Off‖ and press【ENTER】.
3. In the power off dialog, press ―Confirm‖ to shut down the DVR.
4. Enter a user name and password as required.
Power off using the [POWER] key on the front panel or IR Remote:
1. In the ―Live‖ mode press and hold the [POWER] key (on the front panel or IR
Remote) for more five seconds.
2. A power off dialog will ask you to confirm your selection.
3. Enter a user name and password as required. If an incorrect password is entered
three times the unit will return to the live view mode.
60