Securitytec DS-8004HCI-S User Manual page 37

each control method.
In Live View control:
Double click the left mouse key on an individual camera cameo in a multi-screen
display to go to full screen. Double click again to return to the previous multi-screen
display. A right mouse click produces a pop-up menu that provides access to a large
number of features.

Main Menu: Provides access to the DVR Menu.

Single: Allows selection of any full size camera display.

Multi-Preview: Select ―Live View‖ of 4, 9, 12, or 16 channel multi-screen
modes.

Next Preview: Selects the next sequential display (ex. In four-channel: 1-4,
5-8, etc.).

PTZ Control: Access PTZ camera control.

Play: Enter playback mode.

Manual Record: Access the Manual Record Menu.

Close Status: (Open status): Show/hide the status line on the monitor.

Switch VOUT: Switch to the ―Spot‖ monitor output.
Caution: If you select ―Switch VOUT‖ you will lose mouse control of the main monitor.
The mouse pointer will move to the Spot display. If you have a monitor connected to
the ―Spot‖ output you can right click and select ―Switch VOUT‖ to return to the main
display control. If no ―Spot‖ monitor is available you will not be able to return to the
main output using the mouse. You must press the ―Main/Aux‖ key on the front panel,
or the ―VOIP/MON‖ key on the IR Remote. The same issue is present when using
front panel and IR Remote operation. If the Spot monitor is inadvertently selected (by
pressing the appropriate key) when there is no Spot monitor installed, it will appear as
if the unit is not operating properly.
General Mouse Menu Navigation: A standard left mouse click will select most
options. Just position the mouse over the desired menu item and select. A ―right
mouse click‖ pops-up an option list (from the live display). Once in the menu, a right
click will take you to the previous menu. Walk through the following list of items to
familiarize yourself with mouse operation. Starting from the live display:

―Right-click‖ the mouse to view the control options and then and select ―Main
Menu.‖

You can click on any of the options to enter sub menus.

Click to select the Display Menu and view the available options.

Additional mouse clicks will select any menu option and/or change the status of
the check boxes.

Select the ―Setup‖ button next to time/date. You are now in a ―Sub, Sub menu.‖
37