Function Name - FUTABA FMT-03 Instruction Manual

FUNCTION NAME

T h e n a m e o f t h e s p a r e f u n c t i o n s
(AUXILIARY1-8) can be changed for the full
name (10 characters) or for the abbreviated name (4
characters).
● Select [FUNCTION NAME] at the linkage menu and call the
setup screen shown below by pushing the RTN button.
● Select the function name
and return to the Linkage
menu by pushing the RTN
button or pushing the
Home/Exit button.
Function name change method
1. Select [FUNCTION NAME] of the Linkage
Menu and push the RTN button.
2 . T h e F U N C T I O N N A M E s e t u p s c r e e n i s
displayed.
3. When the function whose name is be
change is selected and the RTN button is
pushed, a modification screen is displayed.
4. Select the function to be renamed and
select [RENAME] and push the RTN button. A
character input screen is displayed. Input the
function name.
5. When [RESET] is selected and the RTN button
is held down, the function name is set to the
initial state function name.
68 <Functions of Linkage Menu>
Function name can be changed
6. The function name may be displayed in 10
characters or 4 characters, depending on
the setup screen. For 4 characters, display,
input the function name as required.
<Edit dial>
Scrolling
● Moving cursor
S1
● Push the S1 button
to call next page.