Connector/Plug - FUTABA T16IZ Short Manual

-When an micro SD card is installed in
the T16IZ transmitter, a folder called "Fu-
taba" is created. Folders called "LOG" and
"MODEL" are created in this folder. The
"MODEL" folder stores the model data and
the "LOG" folder stores the telemetry log
data.
-The telemetry log data recorded on the
micro SD card can be converted to CSV
format by the telemeter log converter re-
leased on our home page. When copying or
moving a log file, always select both .FLI
and .FLD file.

Connector/Plug

Open the rubber cover
Trainer
Connector
22
Earphone
Plug
S.BUS (S.I/F)
Connector
CAUTION
B e s u r e t o t u r n o f f t h e p o w e r t o
the transmitter before inserting or
removing the micro SD card.
As the micro SD card is a precision
device, do not use excessive force when
inserting.
Earphone plug
Connecting a stereo headphone to this plug, the
speech information of telemetry can be heard.
S.BUS connector (S.I/F)
When using an S.BUS servo and telemetry sensor,
connect them both here.
Connector for trainer function
When you use the trainer function, connect the
optional trainer cable between the transmitters for
teacher and student.
*You can set the trainer function on the Trainer Function
screen in the System menu.