FNe Programmed Scan/FNe ∂F Scan - Icom IC-7600 Instruction Manual

■ Fine programmed scan/Fine ∂F scan
In fne scan (programmed or ∂F), the scan speed
decreases when the squelch opens, but the trans-
cever keeps scannng. The scannng tunng step
shfts from 50 Hz to 10 Hz when the squelch opens.
q Push [EXIT/SET] several tmes to close a mult-
functon screen, f necessary.
w Push [SCAN] (F-5) to select the scan screen.
e Set for programmed scan or ∂F scan as descrbed
on prevous page.
r Push [PROG] (F-1) or [∂F] (F-2) to start a scan.
• " " or "
ponts blnk whle scannng.
t Push [FINE] (F-3) to start a fne scan.
• "
blnks nstead of "
respectvely.
y When the scan detects a sgnal, the scan speed
decreases but scan does not stop.
u Push [PROG] (F-1) or [∂F] (F-2) to stop the scan;
push [FINE] (F-3) to cancel the fne scan.
• Rotatng the man dal also cancels the scan.
i Push and hold [RECALL] (F-5) for 1 sec. to recall
the frequency that s set before startng the scan, f
desred.
" and decmal
" or " "
" or " , "
SCANS
∂F
FINE
F-2 F-3
F-1 F-5 EXIT/SET
PROG SCAN
RECALL
7
1
2
Main dial
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
108