Rit Function; D Rit Monitor Function - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

■ RIT function

The RIT (Receve Increment Tunng) functon com-
pensates for off-frequency operaton of the receved
staton.
The functon shfts the receve frequency up to ±9.999
kHz n 1 Hz steps (10 Hz steps when cancellng the 1
Hz step readout) wthout movng the transmt fre-
quency.
q Push [RIT] to turn the RIT functon ON and OFF.
• " " and the shftng frequency appear when the
functon s ON.
w Rotate the [RIT/∂TX] control.
• Push and hold [CLEAR] for 1 sec. to reset the RIT fre-
quency.
• Push [CLEAR] momentarly to reset the RIT frequency
when the quck RIT/
• Push and hold [RIT] for 1 sec. to add the shft fre-
quency to the operatng frequency.

D RIT monitor function

When the RIT functon s ON, pushng and holdng
[XFC] allows you to montor the operatng frequency
drectly (RIT s temporarly cancelled).
✔ For your convenience— Calculate function
The shft frequency of the RIT functon can be added/
subtracted to the dsplayed frequency.
➥ Whle dsplayng the RIT shft frequency, push and
hold [RIT] for 1 sec.
73
∂
TX clear functon s ON. (p. 132)
RIT CLEAR
[RIT/∂TX]
RIT shftng frequency
XFC