D Contest Number Set Mode - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D Contest number set mode

Ths menu s used to set the contest (seral) number
and count-up trgger, etc.
• Setting contents
q Durng CW mode operaton, push [KEYER] (F-3)
to select memory keyer screen.
w Push [EXIT/SET] to select memory keyer menu,
then push [001] (F-3) to select contest seral num-
ber set mode.
e Push [Y] (F-1) or [Z] (F-2) to select the desred
set tem.
r Set the desred condton usng the man dal.
• Push and hold [DEF] (F-4) for 1 sec. to select the
default condton or value.
t Push [EXIT/SET] twce to normal screen.
Number Style
Ths tem sets the numberng system used for con-
test (seral) numbers— normal or short morse num-
bers.
Short morse numbers are also referred to as "cut"
numbers.
Count Up Trigger
The count-up trgger allows the contest seral num-
ber to automatcally ncrement after each complete
seral number exchange s sent.
Present Number
Ths tem shows the current number for the count-up
trgger channel set above.
43
• Contest number set mode screen
KEYER / 001
F-3
F-1 F-2
Normal
• Normal : Does not use short morse numbers
(default)
• 190➔ANO : Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT : Sets 1 as A, 9 as N and 0 as T.
• 90➔ NO : Sets 9 as N and 0 as O.
• 90➔ NT : Sets 9 as N and 0 as T.
M2
• M1, M2, M3 and M4 can be set. (default: M2)
001
• Rotate the man dal to change the number, or
push and hold [001CLR] (F-4) for 1 sec. to reset
the current number to 001.
DEF / 001CLR
F-4
Main dial
EXIT/SET