Icom IC-7600 Instruction Manual page 128

■ Display set mode
Bright (LCD)
Adjusts the LCD unt brghtness from 0% (dark) to
100% (brght) range n 1% steps. (default: 50%)
Backlight (Switches)
Adjusts the swtch ndcators brghtness from 1
(dark) to 100 (brght) range n 1 steps. (default: 80)
Display Type
Selects the desred dsplay type from A (Black back)
and B (Blue back). (default: A)
See p. 146 for detals.
Display Font
Selects the desred font for frequency readout from
Basc, Italc and Round. (default: Basc)
See p. 146 for detals.
Meter Response
Set meter needle response from SLOW, MID and
FAST. (default: MID)
Ths settng s effectve for the standard and edge-
wse meter type selectons only.
Meter Type (Normal Screen)
Selects the desred S/RF meter type durng normal
screen ndcaton from Standard, Edgewse and Bar.
(default: Standard)
Meter Type (Wide Screen)
Selects the desred S/RF meter type durng wde
screen or mn scope ndcaton from Edgewse and
Bar. (default: Bar)
Meter Peak Hold (Bar)
Turns the meter peak hold functon ON and OFF.
(default: ON)
Ths functon s used for the bar meter only.
Memory Name
Sets the memory name ndcaton, durng memory
mode operaton, ON and OFF. (default: ON)
50 %
80
A
Basic
MID
Standard
Bar
ON
ON
• OFF : No memory name s dsplayed even a mem-
ory name s programmed.
• ON : The programmed memory name s ds-
played above the frequency ndcaton.
☞ Contnues to the next page.
10
SET MODE
126
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21