Changing A File Name - Icom IC-7600 Instruction Manual

10
SET MODE

■ Changing a file name

123
Symbol REN
F-1
DIR/FILE
When a PC keyboard s connected to [USB] con-
nector on the front panel, the file name can also be
edted from the keyboard. In ths case, a USB hub s
requred.
141
Keypad
ABC
Main dial
F-2 F-3 EXIT/SET
The fle name, saved n the USB-Memory, can be re-
named from the transcever as desred.
q Durng settng save screen ndcaton, push
[DIR/FILE] (F-1) to select tree vew screen.
• Push [Y] (F-2) or [Z] (F-3) to select the desred folder.
• "DECODE," "SETTING" and "VOICE" folders are aval-
able as the default.
• After the folder s selected, push and hold [Ω ≈] (F-4)
for 1 sec. to dsplay content folder(s), f avalable.
w Push [DIR/FILE] (F-1) to select fle lst screen.
e Push [Y] (F-2) or [Z] (F-3) to select the desred
fle.
r Push [REN] (MF5) momentarly to select the fle
name edt condton.
t Push [ABC] (MF6) or [123]/[Symbol] (MF7) to
select the character group, then rotate the man
dal to select the character.
• [ABC] (MF6): A to Z (captal letters); [123] (MF7): 0 to
9 (numerals); [Symbol] (MF7): ! # $ % & ' ` ^ – ( ) { } _
– @ can be selected.
• Push [Ω] (F-1) to move the cursor left, push [≈] (F-2)
to move the cursor rght, push [DEL] (F-3) to delete a
character and push [SPACE] (F-4) to nsert a space.
• Pushng the transcever's keypad, [0]–[9] and [.] can
also enter numerals.
y Push [EXIT/SET] to set the fle name.