Icom IC-7600 Instruction Manual page 132

Tuner Preset Memory Clear
The preset memory* of the selected antenna can be
cleared wth pushng [CLR] (F-5).
* The varable capactor settngs are memorzed as
a preset pont for each frequency range (100 kHz
steps) after the tuner matches an antenna.
[ANT] Switch
You can set the antenna connector selecton to
automatc, manual or non-selecton (when usng 1
antenna only). (default: Auto)
Transverter Function
Selects the transverter operaton condton from
Auto and ON. (default: Auto)
Transverter Offset
Sets the desred offset frequency for the trans-
verter operaton wthn 0.000 to 99.999 MHz n 1 kHz
steps. (default: 16.000 MHz)
RTTY Mark Frequency
Selects the RTTY mark frequency. RTTY mark
frequency s swtched between 1275, 1615 and
2125 Hz. (default: 2125 Hz)
2125 Hz s automatcally selected when the nternal
RTTY decoder s used.
RTTY Shift Width
Selects the RTTY shft wdth. There are 3 selectable
values: 170, 200 and 425 Hz. (default: 170 Hz)
170 Hz s automatcally selected when the nternal
RTTY decoder s used.
• ANT1 Push [CLR] : The preset memory of the
antenna that s connected to
[ANT 1] s cleared after push-
ng [CLR] (F-5).
• ANT2 Push [CLR] : The preset memory of the
antenna that s connected to
[ANT 2] s cleared after push-
ng [CLR] (F-5).
Auto
• OFF : Antenna swtch s not actvated and does
not functon. The [ANT1] connector s
always selected.
• Manual : Antenna swtch s actvated and selects
an antenna manually.
• Auto : Antenna swtch s actvated and the
band memory memorzes the selected
antenna. See p. 112 for detals.
Auto
• Auto : The transcever turns nto transverter oper-
aton condton when 2 to 13.8 V DC s
appled to [ACC2] pn 6.
• ON : Turn the transverter operaton ON.
16.000MHz (14.100.0➔30.100.0)
2125
170
☞ Contnues to the next page.
10
SET MODE
130
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21