File Loading - Icom IC-7600 Instruction Manual

10
SET MODE

■ File loading

F-1 F-2
LOAD
137
LOAD/OPT USB
F-4 F-6
Main dial
F-3 F-5 EXIT/SET
OK
By loadng the saved settng fle from the USB-
Memory, you can easly set up another IC-7600 or
apply the several operators settngs to one IC-7600.
q Durng set mode menu screen ndcaton, push
[USB] (F-6) to select USB set menu screen.
w Push [LOAD] (F-1) to select settng load screen.
e Push and hold [LOAD/OPT] (F-4) for 1 sec. to
select load opton set mode, then rotate the man
dal to set the desred loadng condtons, f desred.
• See page 138 for detals.
r Push [EXIT/SET] to set.
t Push [Y] (F-2) or [Z] (F-3) to select the desred
settng fle.
y Push [LOAD/OPT] (F-4).
• Confrmaton screen appears.
u Push [OK] (F-5) to starts loadng.
• After the loadng s completed, the message dalog,
"Reboot the IC-7600," appears.
i Turn the transcever power OFF then ON to make
the settng effectve.