Recording A Received Audio; D One-Touch RecordNg; D Basic Recording - Icom IC-7600 Instruction Manual

5
VOICE RECORDER FUNCTIONS

■ Recording a received audio

Up to 20 receve voce memores are avalable n the
IC-7600. A total of 209 sec. of audo can be recorded
n receve messages. However, the maxmum record-
able length of a sngle message s 30 sec.
Ths voce recorder records not only the receved
audo, but also the nformaton such as set operat-
ng frequency, mode, and the recordng tme for your
future reference.

D Basic recording

q Push [EXIT/SET] several tmes to close a mult-
functon screen, f necessary.
w Select the desred mode.
e Push [VOICE] (F-2) to call up the voce recorder
screen.
• Prevously selected screen, TX or RX memory, s ds-
played. If the TX memory channel (T1–T4) appears,
push [T/R] (F-6) to select RX memory channel.
r Push and hold [REC] for 1 sec. to start recordng.
• The operatng frequency, mode and current tme are
programmed as the memory names automatcally.
t Push [REC] momentarly to stop recordng.
IMPORTANT!
Push [REC] to stop recordng before, or when
30 sec. has elapsed from the start of recordng.
The voce recorder memory records 30 sec. (max.)
of audo before [REC] s pushed.
For example, when recordng 40 sec. of audo, the
frst 10 sec. audo wll be over-wrtten wth the last
10 sec., so that the total of audo recorded s only
30 sec.
When you record the 21st audo message, or
when the total audo length exceeds 209 sec., the
oldest recorded audo s automatcally erased to
make room for the new audo.
y Push [EXIT/SET] twce to ext the voce recorder
screen.
NOTE: When transmt (or [PTT] s pushed) whle
recordng, no audo wll be recorded.
D One-touch recording
To record the receved sgnal mmedately, one-touch
voce recordng s avalable.
➥ Push [REC] momentarly to store the prevous
15 sec. audo.
• The recordable tme perod can be set n voce set
mode. (p. 97)
91
REC
F-2 F-6 EXIT/SET
VOICE T/R
The remaining time for recording
is indicated.
REC