Operating Mode Selection - Icom IC-7600 Instruction Manual

Hf/50 mhz
Hide thumbs Also See for IC-7600:
Table of Contents

Advertisement

■ Operating mode selection

SSB (USB/LSB), SSB data (USB data/LSB data),
CW, CW reverse (CW-R), RTTY, RTTY reverse
(RTTY-R), PSK, PSK reverse (PSK-R), AM, AM data,
FM and FM data modes are avalable n the IC-7600.
Push the desred mode swtch to select a mode of
operaton.
See the dagram as at rght for the order of selecton.
Mcrophone sgnals are muted when data mode s
selected dependng on the set mode settngs
(p. 124).
• Selecting SSB mode
➥ Push [SSB] to select USB or LSB.
• USB s selected frst when above 10 MHz; or LSB s
selected frst when below 10 MHz operaton.
• After USB or LSB s selected, push
between USB and LSB.
• After USB or LSB s selected, push and hold
1 sec. to select USB or LSB data mode, respectvely.
• After USB or LSB data mode s selected, push and hold
[SSB] for 1 sec. to select data 1, 2 and 3, n sequence.
• In USB or LSB data mode, push [SSB] to return to
USB or LSB mode, respectvely.
• Selecting CW mode
➥ Push [CW] to select CW.
• After CW s selected, push [CW] to toggle between CW
and CW reverse mode.
• Selecting RTTY/PSK mode
➥ Push [RTTY/PSK] to select RTTY or PSK.
• After RTTY or PSK s selected, push [RTTY/PSK] to
toggle between RTTY and PSK.
• After RTTY or PSK s selected, push and hold
[RTTY/PSK] for 1 sec. to toggle between RTTY and
RTTY reverse, or, PSK and PSK reverse mode,
respectvely.
• Selecting AM/FM mode
➥ Push [AM/FM] to select AM or FM.
• After AM or FM s selected, push [AM/FM] to toggle
between AM and FM.
• After AM or FM s selected, push and hold [AM/FM] for
1 sec. to select AM or FM data mode, respectvely.
• After AM or FM data mode s selected, push and
hold [AM/FM] for 1 sec. to select data 1, 2 and 3, n
sequence.
• In AM or FM data mode, push [AM/FM] to return to AM
or FM mode, respectvely.
USB-D1
USB-D2
USB-D3
[SSB]
to toggle
[SSB]
for
RTTY-R
AM-D1
AM-D2
AM-D3
BASIC OPERATION
Mode switches
SSB
USB
LSB
CW
CW
CW-R
RTTY/PSK
RTTY
PSK
AM/FM
AM
FM
: Push mode switch momentary.
: Push and hold mode switch for 1 sec.
3
1
LSB-D1
2
LSB-D2
LSB-D3
3
4
5
6
PSK-R
7
8
FM-D1
9
FM-D2
FM-D3
10
11
12
13
14
15
16
17
18
19
20
21
32

Advertisement

Table of Contents
loading

Table of Contents