Icom IC-7600 Instruction Manual page 127

10
SET MODE
■ ACC set mode (Contnued)
SEND Relay Type
Selects the swtchng relay type for [RELAY] from
Lead and MOSFET.
Select the sutable relay type when connectng a
non-Icom lnear amplfer.
External Meter Output
Selects the desred tem for an external meter nd-
caton.
External Meter Level
Sets the output level for an external meter ndcaton
wth n 0% to 100% range n 1% steps.
• Approx. 2.5 V at 50% (default) settng for full-scale nd-
caton. (4.7 kø mpedance)
REF Adjust
Adjusts the nternal reference sgnal frequency
wthn 0% to 100% range n 1% steps durng fre-
quency calbraton.
NOTE: Default settng s dfferent for each trans-
cever.
125
Lead
• Lead : Use mechancal relay.
(16 V DC/0.5 A max.; default)
• MOS-FET : Use semconductor type relay.
(250 V/200 mA max.)
Auto
• Auto : Outputs the recevng sgnal strength level
durng receve, and outputs the selected
level (selected wth [METER]), durng
transmt. (default)
• S : Outputs the recevng sgnal strength level
durng receve.
• Po : Outputs the transmttng power level dur-
ng transmt.
• SWR : Outputs the VSWR level durng transmt.
• ALC : Outputs the ALC level durng transmt.
• COMP : Outputs the compresson level durng
transmt.
d
• V : Outputs the dran termnal voltage of the
fnal amplfer MOSFETs.
• I d : Outputs the dran current of the fnal
amplfer MOSFETs.
50 %
50 %
(Example)