Removing Packaging - Thermador M301 Installation Manual

30" Units - under induction cooktop
Heat shield: Self positioning — 2 2/s" length,
Minimum required air clearance: 1° 26mm)
AY 31/9" Abie"
(102mm)
(79mm)
(106mm)
COUNTERTOP
ar
(172mm)
Fitting/
(
Conduit
SUMP
23/4"
Tie"
(70mm)
Q7mm)
36"
OVEN
28'/4"
914
(914mm)
2476"
(718mm)
20 1/6"
(621mm)
.
(738mm)
271/16
(687mm)
fae
)
V
TOE KICK
21mm,
Note: Dimensions based on standard countertop height (36" with 43/4" toe kick
including ba se plate).
The built-in oven can be installed below the induction cooktop as long as there
is an air clearance of 1" between the bottom of the cooktop and the top of the oven.
Removing Packaging
* Cut straps on outside of box.
* Remove cardboard box.
* Remove all top and side cardboard and Styrofoam
braces.
*« Place oven in front of cabinets where it is to be
installed.
* Unscrew unit from Left and Right Brackets as show in
"Left and Right Packaging Bracket Removal."
Left Packaging Bracket Removal
Note:
Different models use different packaging materials. Actual
brackets may look differently. Bracket remains in packaging
base. Unit should stay on packaging base until ready to be
lifted into cabinet cutout.
English 9