Removing The Lamp Transformer; And The Double Line Break Relay - Thermador C302 Service Manual

Removing the Lamp Transformer &
the Upper or Lower Oven Double Line Break Relay
WARNING
Turn off the electrical power circuit to the
oven at the main junction box before ser-
vicing this unit.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1. Turn off the electrical power to the oven.
2. Open the upper oven door.
3. Remove the control panel and display
head (see pages 2-16 and 2-17 for the pro-
cedure).
4. Remove the front subpanel (see page 2-22).
5. To remove the lamp transformer (see Fig-
ure 28):
a) Remove the screws and disconnect the
wires from the terminals.
b) Install the new lamp transformer and
reconnect the wiring.
6
1
10
Primary
Winding
5
Secondary
Winding
Figure 28
6. To remove an oven stalled fan relay (see
Figure 29):
a) Remove the screws and disconnect the
wires from the relay terminals.
b) Install the new oven stalled fan relay
with the terminals positioned as shown
and reconnect the wiring.
Upper Yel (102)
Lower Org (112)
Upper Wht (103)
Lower Wht (113)
Upper Blk (104)
Lower Blk (114)
Screw (2)
OVEN
Double Line
STALLED FAN
Break Relay
RELAY
Front Of Oven
Figure 29
7. Reassemble the oven.
Page 43
Upper Blk (12)
Lower Blk (92)