Table of Contents
Advertisement
4
Replacing Assembly Units
10
4.2
Replacing the Print Rollers
i
Notice!
The replacement of both print rollers can be done in the same manner.
Figure 7
1. Turn lever (4) counterclockwise to lift the printhead assembly.
2. Loosen screw (6).
3. Remove ball bearing (5) and print roller (2) through the plate (3).
4. Guide the new print roller through the plate (3) to the axle (1). Turn the roller easily to align it to the hexagonal end
of the axle and push the roller further until it stops.
5. Insert the ball bearing (5) in to the plate (3) and fix it with screw (6).
1
Replacing the print rollers
2
3
4
5
6
2
4
5
6
10
Advertisement
Table of Contents
