Ssl - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

BMC
SOL Settings Page
I
TEM
Enable Serial over
Checked=Enabled; Unchecked=Disabled.
LAN
Select the IPMI Serial over LAN minimum user
privilege:
Channel Privilege
Administrator

Level Limit
Operator

User

Save Use this button to save your settings.
Advanced SOL Set-
Use this button to go to advanced SOL page.
tings
SOL Advanced Settings
Use this page to configure the advanced SOL settings.
D
ESCRIPTION
4-43
SOL Advanced Settings
I
TEM
The amount of the time that the BMC will wait
Character Accumu- before transmitting a partial SOL character data
late Interval package. 1-based 5ms increments. This value
must be less than 255.
The BMC will send an SOL character data pack-
age containing the characters as soon as this
Character Send
number of characters (or greater) has been
Threshold
accepted. 1-based units. This value must be
less than 255.
Save Use this button to save your settings.
Cancel Use this button to cancel your settings.

SSL

The Secure Socket Layer protocol was created by Netscape to
ensure secure transactions between web servers and brows-
ers. The protocol uses a third party, a Certificate Authority (CA),
to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC.
Using this, the device can be accessed in a secured mode.
To open SSL Certificate Configuration page, click Configura-
tion > SSL from the main menu. There are three tabs on this
page.
C G
ONFIGURATION ROUP
D
ESCRIPTION