Power Supply Unit; Removing A Power Supply Unit; Installing A Power Supply Unit - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE

2.3. Power Supply Unit

CAUTION!
!
DISCONNECT THE POWER SUPPLY UNIT FROM THE POWER SOURCE
. F
BEFORE REMOVING PSU
AGE TO THE EQUIPMENT OR PERSONAL INJURY
Note:
The redundant power supply unit can be replaced without shut-
ting down the system.

Removing a Power Supply Unit

1. Pull the PSU handle (A) up to the open position.
A
Opening the PSU Handle
2. Press and hold the locking latch (B) lever.
3. Pull the PSU from the system.
AILURE TO DO SO COULD RESULT IN DAM
.
B
-
A

Installing a Power Supply Unit

Installing a Power Supply Unit
Insert the power supply unit (PSU) into the system. Make sure
the PSU is flush with the system and the locking latch lever (B)
is locked in place.
2-8
P
OWER
Removing the PSU
B
S U
UPPLY NIT
B