Removing A 10Gbe Sfp+ Mezzanine Card Assembly - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE
Removing a 10GbE SFP+ Mezza-
nine Card Assembly
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Remove screw(s) securing the card assembly.
Removing Mezzanine Card Assembly Screw(s)
2. Remove assembly from chassis.
3. Remove screw(s) securing mezzanine card assembly
cover.
Removing Mezzanine Card Assembly Cover Screw(s)
4. Remove mezzanine card from assembly cover.
2-25
E C
XPANSION ARDS