Lan Interface; Session And User; Rmcp; Serial Over Lan - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

BMC

LAN Interface

BMC LAN interface in AST2300 is assigned to dedicated NIC
LAN (Default) and a shared NIC in S200-X12TS. IPMI Specifi-
cation v2.0 defines how IPMI messages, encapsulated in
RMCP/RMCP+ packet format, can be sent to and from the
BMC. This capability allows a remote console application to
access the BMC and perform the following operations:
Chassis control: obtain chassis status, reset and power-up

the chassis
Obtain system sensor status

Obtain and Set system boot options

Obtain Field Replaceable Unit (FRU) information

Obtain System Event Log (SEL) entries

Obtain Sensor Data Records (SDR)

Set Platform Event Filtering (PEF)

Set LAN configurations

In addition, the BMC supports LAN alerting in the form of SNMP
traps that conform to the IPMI Platform Event Trap (PET) for-
mat.

Session and User

This BMC supports ten (10) user accounts. Each can have a
different user name, password and privilege level. Four
accounts can login simultaneously. The available user privilege
levels are User, Operator, and Administrator.

RMCP+

Besides RMCP defined by DMTF, AST2300 also supports
RMCP+ protocol defined in IPMI 2.0.
Authentication Algorithm types supported: RAKP-none,

RAKP-HMAC-SHA1, RAKP-HMAC-MD5.
Integrity Algorithm types supported: none, HMAC-SHA1-

96, HMAC-MD5-128, MD5-128.
Confidentiality Algorithm types supported: none, AES-

CBC-128.
Session Support: 15


Serial Over LAN

BMC supports 1 IPMI (Spec v2.0) specific SOL session. BMC
supports redirect data from UART interface.
4-3
LAN I
NTERFACE