Installing The Rack Brackets; Preparing For The Installation - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

R K A
AIL IT SSEMBLY
6.1. Rail Kit Assembly

Installing the Rack Brackets

When the server is to be installed into a rack, it is necessary to
install two rack mount brackets onto the server chassis prior to
installing the server into the rack. Follow the procedures below
to install the rack mount brackets onto the server.

Preparing for the Installation

Review all the tasks required to install and configure the

system
Review the electrical requirements and power supply input

voltage information
Examine the system's shipping kit contents and assemble

the required tools for installation
Review ESD requirements and take safety precautions

Before installing the system into a rack, install any optional

components into the system
Stabilize the rack before installing the system, if necessary

WARNING!
!
Use caution when removing the inner rail from the rail kit assem-
bly. The rails can slide out and cause personal injury or damage to
the server.
6-1
R K A
AIL IT SSEMBLY