Installing Memory Modules - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE
1. Press down on the two memory module slot levers (A).
The memory module partially ejects.
1
Removing Memory Modules
2. Lift out the memory module.
2
1
A

Installing Memory Modules

Push the memory module firmly into the memory module slot.
The locking latches should automatically close over the edges
of the memory board when fully inserted into the slot.
Installing Memory Modules
CAUTION!
!
H
ANDLE THE MEMORY MODULE BY THE EDGES AT ALL TIMES
Note:
Make sure the notch in the memory board aligns with the
obstruction in the memory slot.
2-19
I M M
NSTALLING EMORY ODULES
.