Sol; Ssl - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

SOL

Here, you can configure the Serial over LAN settings, select or
change values for each attribute and click the Save button to
save any changes.
Figure 4-31. SOL Settings Page
The fields of SOL Settings Page are explained below.
Table 4-38: SOL Settings Page
I
TEM
Enable Serial over
Checked=Enabled; Unchecked=Disabled.
LAN
D
ESCRIPTION
4-40
Table 4-38: SOL Settings Page (Continued)
I
TEM
Select the IPMI Serial over LAN minimum user
privilege:
Channel Privilege
Administrator

Level Limit
Operator

User

Save Use this button to save your settings.
Advanced SOL
Use this button to go to advanced SOL page.
Settings

SSL

The Secure Socket Layer protocol was created by Netscape to
ensure secure transactions between web servers and brows-
ers. The protocol uses a third party, a Certificate Authority (CA),
to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC.
Using this, the device can be accessed in a secured mode.
To open SSL Certificate Configuration page, click Configura-
tion > SSL from the main menu. There are three tabs on this
page.
Upload SSL option is used to upload the certificate and

private key file into the BMC.
Generate SSL option is used to generate the SSL certifi-

cate based on configuration details.
C G
ONFIGURATION ROUP
D
ESCRIPTION