1. Manuals
  2. Brands
  3. QUANTA Manuals
  4. Server
  5. S200-X12TS
  6. User manual

QUANTA S200-X12TS User Manual

S200 series 2-socket general purpose 1u server
Hide thumbs
Table of Contents

Advertisement

Quick Links

STRATOS S200 Series
S200-X12TS
2-Socket General Purpose
1U Server
Guide
Document Version: 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S200-X12TS and is the answer not in the manual?

Questions and answers

Related Manuals for QUANTA S200-X12TS

Summary of Contents for QUANTA S200-X12TS

  • Page 1 STRATOS S200 Series S200-X12TS 2-Socket General Purpose 1U Server Guide Document Version: 1.0...
  • Page 2 ONVENTIONS Conventions Several different typographic conventions are used throughout this manual. Refer to the following examples for common usage. Bold type face denotes menu items, buttons and application names. Italic type face denotes references to other sections, and the names of the folders, menus, programs, and files. <Enter>...
  • Page 3 CRONYMS Acronyms EFINITION EFINITION A signal is deasserted when in the inactive state. Analog to Digital Active-low signal names have “_L” appended to the ACPI Advanced Configuration and Power Interface end of the signal mnemonic. Active-high signal names Deasserted have no “_L” suffix. To reduce confusion when referring Alerting Standard Forum to active-high and active-low signals, the terms one/ Active-high (positive true) signals are asserted when in...
  • Page 4 CRONYMS EFINITION EFINITION IPMI Intelligent Platform Management Interface Unit of electrical resistance In-Target Probe Power Distribution Board 1024 bytes. Platform Event Filtering Keyboard Controller Style Platform Event Paging Keyboard, Video, Mouse PERR Parity Error Local Area Network Power-On Hours Liquid Crystal Display POST Power-On Self Test Lower Critical Threshold...
  • Page 5 CRONYMS EFINITION Server Management Mode Server Management Software SNMP Simple Network Management Protocol Serial Over LAN UART Universal Asynchronous Receiver/Transmitter Upper Critical Threshold User Datagram Protocol UNCT Upper Non-Critical Threshold UNRT Upper Non-Recoverable Threshold Watchdog Timer Word 16-bit quantity...

  • Page 6: Important Safety Instructions

    AFETY NFORMATION Safety Information Important Safety Instructions Hazardous conditions, devices and cables: Hazardous elec- trical conditions may be present on power, telephone, and com- munication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and Read all caution and safety statements in this document before modems attached to the server before opening it.
  • Page 7 AFETY NFORMATION with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may bend or break.

  • Page 8: Revision History

    Copyright © 2014 Quanta Computer Inc. This publication, ufacturer to notify any person of such revision or changes.

  • Page 9: About The Server

    About the Server Chapter 1...

  • Page 10: Main Features

    BOUT THE ERVER NTRODUCTION 1.1. Introduction Main Features S200-X12TS Specification (Continued) PECIFICATION ESCRIPTION Quanta STRATOS S200-X12TS is a 2-socket general purpose 2.5” 1 to 1 SKU ® ® 1U server, supporting two Intel Xeon processor E5-2400 LSI SAS controller ...
  • Page 11 Memory ECC UDIMM/RDIMM/LRDIMM slots per  file x8 slot PCIe Expansion Slot node, up to 384 GB (1) PCIe x8 G2 Quanta LSISAS/RAID Mezza-  2.5” 1 to 1 SKU nine card slot (10) 2.5" hot-plugable HDD(Mezz *8+ AHCI ...
  • Page 12 + LSI RAID 6 Key for RAID 0/1/10/5/6/ 50/60 (optional) ® (2) Intel Powerville I350GbE RJ45 ports  Network (1) Quanta 10GbE SFP+ dual port mezza-  nine card (optional) (1) Dedicated 10/100 BASE-T RJ45 manage- Management Port ment port per node Integrated Graphics Aspeed AST2300 8MB DDR3 Video memory (2) USB 2.0 ports...

  • Page 13: Package Contents

    BOUT THE ERVER ACKAGE ONTENTS 1.2. Package Contents The following list includes the package components: 1U chassis system  Mainboard modules  2 x Processor heatsinks  Power supply  Power cord (optional)  CD (technical guide included)  Rail kit ...

  • Page 14: A Tour Of The System

    1.3. A Tour of the System System Overview 2.5” SKU System Component Description ESCRIPTION The S200-X12TS is available as a 2.5” or a 3.5” form factor. PSUs 2x power supply units (PSU) 2.5” or 3.5” HDD 2.5” or 3.5” fixed HDDs 2.5”...

  • Page 15: System Front Features

    BOUT THE ERVER YSTEM RONT EATURES 3.5” HDD System 3.5” SKU System Component Description (Continued) ESCRIPTION Chassis System chassis 3.5 HDDs 3.5” hard disk drive (HDD) cage System fan (4) System fan modules MB module Mainboard module System Front Features Configuration 2.5”...

  • Page 16: Control Panel

    BOUT THE ERVER YSTEM RONT EATURES Control Panel 3.5” HDD Configuration 2.5” HDD SKU Control Panel 3.5” HDD Configuration System Configuration ESCRIPTION Control Panel Control system 2.5” HDD SKU Control Panel Features HDD Bays HDDs arrays 2.5” HDD SKU Control Panel Features ESCRIPTION Amber Blinking: Critical failure: fan, voltage, tempera-...
  • Page 17 BOUT THE ERVER YSTEM RONT EATURES 2.5” HDD SKU Control Panel Features (Continued) 3.5” HDD SKU Control Panel Features (Continued) ESCRIPTION ESCRIPTION Green On Reset But- Base system On ton with Push button to Reset system Based on System Off, Push Button to Power But- PSU and System On ton with LED...
  • Page 18 BOUT THE ERVER YSTEM EATURES System Rear Features I/O Features Configuration System Rear I/O Features S200-X12TS System I/O Features System Rear Configuration EATURE ESCRIPTION System Rear Configuration 10GbE SFP+ mezzanine Port Optional ESCRIPTION Power supply unit Main Power Sup- Connect serial devices to this...

  • Page 19: Power Subsystem

    Power Supply Units by Model AC I ODEL NPUT (1) 750W high efficiency PSU, S200-X12TS 110/220V 100-240VAC 50/60Hz Note: To use mainboard modules other than the models listed make sure to contact the system dealer first and obtain authorized approval.
  • Page 20 LED S BOUT THE ERVER TATUS EFINITIONS I/O LED Description - 1GbE LAN (Continued) I/O LED Description - 1GbE LAN (Continued) ONDITI ESCRIPTIO ONDITI ESCRIPTIO OLOR OLOR Green LAN Link Green LAN Link LAN access LAN access (off when (off when Link/Act Green Black...
  • Page 21 LED S BOUT THE ERVER TATUS EFINITIONS I/O LED Description - 10GbE LAN (Continued) I/O LED Description - 10GbE LAN ONDITI ESCRIPTIO ONDITI ESCRIPTIO OLOR OLOR Green LAN Link Unit Blue selected for LAN access identification (off when Identification LED Link/Act Green Black...

  • Page 22: Lan Led

    LED S BOUT THE ERVER TATUS EFINITIONS LAN LED I/O LED Description - 10GbE LAN (Continued) ONDITI ESCRIPTIO OLOR The system mainboard has one I350GbE Ethernet controller and two 1GbE ports. Each RJ45 connector has two built-in Green LAN Link LEDs.

  • Page 23: Control Panel Led

    LED S BOUT THE ERVER TATUS EFINITIONS Control Panel LED 3.5” HDD SKU Control Panel LED (Continued) 3.5 SKU LED F UNCTION AND EHAVIOR 3.5” HDD SKU Control Panel LED OLOR ONDITION ESCRIPTION Hard disk drive access 3.5” HDD SKU Control Panel LED Green Blinking (only on board SATA...
  • Page 24 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Control Panel LED 2.5” HDD SKU Control Panel LED (Continued) 3.5 SKU LED F UNCTION AND EHAVIOR 2.5” HDD SKU Control Panel LED OLOR ONDITION ESCRIPTION 3.5 SKU LED F UNCTION AND EHAVIOR Green...

  • Page 25: Hdd Led

    LED S BOUT THE ERVER TATUS EFINITIONS HDD LED Note: LSI 9210-8i and SAS2008, SAS2308 Mezzanine card no  3.5” HDD SKU One to One AMI LED Behav- RAID mode, only support Simple LED pattern. If SW RAID cards no crate RAID mode, only support Simple ...
  • Page 26 LED S BOUT THE ERVER TATUS EFINITIONS 3.5” HDD SKU One to One Backplane LED Behavior The 4-disk backplane supports up to 4 drive slots and provides the LEDs that are used to light the HDD status indicators as in the fol- lowing table.
  • Page 27 LED S BOUT THE ERVER TATUS EFINITIONS 3.5” HDD SKU One to One Backplane LED Pattern LED P NE TO ACKPLANE ATTERN (RAID S EVICE TATES TATES (RAID EVICE TATES LED (G LED (R LED (D DENTIFICAITON TATUS REEN AULT CTIVE REEN TATES...
  • Page 28 LED S BOUT THE ERVER TATUS EFINITIONS Note: The LED pattern follows the DCS LED pattern spec. design.  The LED pattern is only for MegaRAID card.  SAS2008, SAS2308 Mezzanine card no support Full LED, so only support Simple LED mode. ...
  • Page 29 TATUS EFINITIONS 2.5” HDD SKU One to One Backplane (2.5”x10 SKU) Note: Applies to Quanta SAS2008 and SAS2108 Mezzanine card.  The pattern only on the RAID mode.  The backplane included AMI 9086 Backplane Controller, LED decode from SGPIO singles.
  • Page 30 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU One to One Backplane LED Pattern (2.5” x10 SKU) (Continued) LED P NE TO ACKPLANE ATTERN (RAID S EVICE TATES TATES (RAID EVICE TATES LED (G LED (R LED (D DENTIFICAITON TATUS REEN...
  • Page 31 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) The 10-disks backplane supports up to 10 drive slots and provides the LEDs that are used to light the HDD status indicators as shown in the following table. 2.5”...
  • Page 32 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) LED P XPANDER ATTERN (RAID S HDD A EVICE TATES TATES CCESS SES-2 TATUS AULT (RAID S LED (D DENTIFICAITON EVICE TATES TATES CTIVE REEN OMMAND REEN...
  • Page 33 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) LED P XPANDER ATTERN (RAID S HDD A EVICE TATES TATES CCESS SES-2 TATUS AULT (RAID S LED (D DENTIFICAITON EVICE TATES TATES CTIVE REEN OMMAND REEN...

  • Page 34: Psu Led

    LED S BOUT THE ERVER TATUS EFINITIONS PSU LED 2.5” HDD SKU Simple LED Mode (2.5” x10 SKU) For LSI 9210-8i and SAS2008, SAS2308 mezzanine card. 2.5” HDD SKU Simple LED Mode LED P IMPLE ATTERN HDD A EVICE TATES CCESS PSU LED TATUS...

  • Page 35: Installation And Assembly Safety Instructions

    Installation and Assembly Safety Instructions Chapter 2...

  • Page 36: Installation Assembly Safety Instructions

    NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS NSTALLATION SSEMBLY AFETY NSTRUCTIONS 2.1. Installation Assembly Safety Instructions Guidelines The power supply in this product contains no user-serviceable parts. Refer servicing only to qualified personnel. Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A product with more than one power supply will have a separate AC power cord for each supply.
  • Page 37 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES SAFETY STEPS: Whenever you remove the chassis covers to access the inside of the system, follow these steps: 1. Turn off all peripheral devices connected to the system. 2. Turn off the system by pressing the power button. 3.
  • Page 38 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES The system is designed to operate in a typical office environment. Choose a site that is: Clean and free of airborne particles (other than normal room dust).  Well ventilated and away from sources of heat including direct sunlight. ...

  • Page 39: Safety Information

    Safety Information Chapter 3...

  • Page 40: Server Safety Information

    AFETY NFORMATION ERVER AFETY NFORMATION 3.1. Server Safety Information Safety Warnings and Cautions To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warn- ings and precautions in this guide before installing or maintain- ing your server product.

  • Page 41: Intended Application Uses

    AFETY NFORMATION NTENDED PPLICATION Intended Application Uses Indicates do not touch fan blades, may result in injury. This product was evaluated as Information Technology Equip- ment (ITE), which may be installed in offices, schools, computer Indicates to unplug all AC power cord(s) to discon- rooms, and similar commercial type locations.

  • Page 42: Site Selection

    AFETY NFORMATION ELECTION Site Selection Equipment Handling Practices The system is designed to operate in a typical office environ- Reduce the risk of personal injury or equipment damage: ment. Choose a site that is: Conform to local occupational health and safety require- ...

  • Page 43: Power And Electrical Warnings

    AFETY NFORMATION OWER AND LECTRICAL ARNINGS Power and Electrical Warnings CAUTION! HEN REPLACING A HOT PLUG POWER SUPPLY UNPLUG THE POWER CORD TO THE POWER SUPPLY BEING REPLACED BEFORE REMOVING IT FROM THE SERVER CAUTION! HE POWER BUTTON INDICATED BY THE STAND BY POWER MARK , DOES NOT COMPLETELY TURN OFF THE SYSTEM...

  • Page 44: System Access Warnings

    AFETY NFORMATION YSTEM CCESS ARNINGS System Access Warnings CAUTION! HE POWER SUPPLY CORD MUST BE PLUGGED INTO SOCKET OUTLET THAT IS ARE PROVIDED WITH A SUITABLE EARTH GROUND CAUTION! O AVOID PERSONAL INJURY OR PROPERTY DAMAGE THE FOLLOW ING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING THE INSIDE OF THE PRODUCT Turn off all peripheral devices connected to this product.

  • Page 45: Rack Mount Warnings

    AFETY NFORMATION OUNT ARNINGS You are responsible for installing a main power disconnect for CAUTION! the entire rack unit. This main disconnect must be readily NLESS YOU ARE ADDING OR REMOVING A HOT PLUG COMPONENT accessible, and it must be labeled as controlling power to the ALLOW THE SYSTEM TO COOL BEFORE OPENING THE COVERS entire unit, not just to the server(s).

  • Page 46: Other Hazards

    (ESD) AFETY NFORMATION LECTROSTATIC ISCHARGE Other Hazards Reliable Earthing - Reliable earthing of rack-mounted equip- ment should be maintained. Battery Replacement Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

  • Page 47: Cooling And Airflow

    AFETY NFORMATION THER AZARDS Cooling and Airflow CAUTION! AREFULLY ROUTE CABLES AS DIRECTED TO MINIMIZE AIRFLOW BLOCKAGE AND COOLING PROBLEMS OR PROPER COOLING AND AIRFLOW OPERATE THE SYSTEM ONLY WITH THE CHASSIS COVERS INSTALLED PERATING THE SYSTEM WITHOUT THE COVERS IN PLACE CAN DAMAGE SYSTEM PARTS O INSTALL THE COVERS Check first to make sure you have not left loose tools or...

  • Page 48: Regulatory And Compliance Information

    Regulatory and Compliance Infor- mation Chapter 4...

  • Page 49: Product Regulatory Compliance Markings

    EGULATORY AND OMPLIANCE NFORMATION RODUCT EGULATORY OMPLIANCE ARKINGS 4.1. Product Regulatory Compliance Markings Product Regulatory Compliance Markings (Continued) This product is marked with the following product certification markings: BSMI Certifi- Product Regulatory Compliance Markings cation Num- R43039 Taiwan ber & Class A EGULATORY Warning EGION...

  • Page 50: Electromagnetic Compatibility Notices

    EGULATORY AND OMPLIANCE NFORMATION LECTROMAGNETIC OMPATIBILITY OTICES 4.2. Electromagnetic Compatibility Notices FCC Verification Statement Connect the equipment to an outlet on a circuit other than  the one to which the receiver is connected. (USA) Consult the dealer or an experienced radio/TV technician ...

  • Page 51: Bsmi (Taiwan)

    (CE D EGULATORY AND OMPLIANCE NFORMATION UROPE ECLARATION OF ONFORMITY Europe (CE Declaration of Con- BSMI (Taiwan) formity) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product This product has been tested in accordance too, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC).

  • Page 52: Restriction Of Hazardous Sub- Stances (Rohs) Compliance

    / or stances (RoHS) Compliance take-back. ® Quanta Computer Inc. has a system in place to restrict the use of banned substances in accordance with the European Direc- tive 2002/95/EC. Compliance is based on declaration that...

This manual is also suitable for:

Stratos s200 seriesStratos s200-x12ts

Table of Contents