Sol; Ssl - QUANTA QuantaGrid Series User Manual

BMC

SOL

Here, you can configure the Serial over LAN settings, select or change values for each attri-
bute and click the Save button to save any changes.
The fields of SOL Settings Page are explained below.
Table 22: SOL Settings Page
I
TEM
Enable Serial over LAN
Channel Privilege Level Limit
Save
Advanced SOL Settings

SSL

The Secure Socket Layer protocol was created by Netscape to ensure secure transactions
between web servers and browsers. The protocol uses a third party, a Certificate Authority
(CA), to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this, the device can be
accessed in a secured mode.
To open SSL Certificate Configuration page, click Configuration > SSL from the main
menu. There are three tabs on this page.
Upload SSL option is used to upload the certificate and private key file into the BMC.

Generate SSL option is used to generate the SSL certificate based on configuration

details.
Figure 3-36. SOL Settings Page
Checked=Enabled; Unchecked=Disabled.
Select the IPMI Serial over LAN minimum user privilege:
 Administrator
 Operator
 User
Use this button to save your settings.
Use this button to go to advanced SOL page.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-51