Chipset Screen - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

BIOS
Console Redirection Settings Fields (Continued)
S I O
ETUP TEM PTIONS
Flow control can
prevent data loss
from buffer over-
flow. When send-
ing data, if the
receiving buffers
are full, a 'stop' sig-
[None]
nal can be sent to
Flow Control stop the data flow.
[Hardware
Once the buffers
RTS/CTS]
are empty, a 'start'
signal can be sent
to re-start the flow.
Hardware flow con-
trol uses two wires
to send start/stop
signals.
H T C
ELP EXT OMMENTS

Chipset Screen

The Chipset screen provides an access point to configure sev-
eral options. On this screen, the user selects the option that is
to be configured. Configurations are performed on the selected
screen, not directly on the Chipset screen.
To access this screen from the Main screen, press the right
arrow until the Chipset screen is chosen.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Server Mgmt
North Bridge
South Bridge
ME Subsystem
Version 2.11.1210 - Copyright (C) 2011 American Megatrends, Inc.
Chipset Screen
3-25
C
HIPSET
Boot Security Save & Exit
North Bridge Parameters.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
S
CREEN