Installing A Sas/Raid Mezzanine Card Assembly - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE
5. Remove screw(s) securing SAS/RAID card to assembly
cover.
5
Removing SAS/RAID Card from Assembly Cover
6. Remove SAS/RAID card from assembly cover.
5
6
2-28
Installing a SAS/RAID Mezza-
nine Card Assembly
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Align the screw hole(s) on the SAS/RAID card with the
hole(s) on the assembly cover.
2
Installing SAS/RAID Card on Assembly Cover
2. Secure SAS/RAID card to assembly cover with screw(s).
E C
XPANSION ARDS
2
1