Virtual Media - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

BMC
Note:
There is a list of reserved users which cannot be added / modi-
fied as BMC users. Please Refer "MEGARAC SP-X Platform
Porting Guide" section "Changing the Configurations in PMC
File-> User Configurations in PMC File" for the list of reserved
users.

Virtual Media

In MegaRAC GUI, this page to configure Virtual Media device
settings. If you change the configuration of the virtual media in
this page, it shows the appropriate device in the JViewer Vme-
dia dialog. For example, if you select two floppy devices in Con-
figure Virtual Media page, then in JViewer > Vmedia, you can
view two floppy device panel.
To open Virtual Media page, click Configuration > Virtual
Media from the main menu. A sample screenshot of User Man-
agement Page is shown in the screenshot below.
Configure Virtual Media Devices
The following fields are displayed in this page.
Configure Virtual Media Devices
I
TEM
The number of floppy devices that support for
Floppy devices
Virtual Media redirection.
The number of CD/DVD devices that support for
CD/DVD devices
Virtual Media redirection.
The number of hard disk devices that support for
Hard disk devices
Virtual Media redirection.
To enable or disable the local media support for
Local Media Support
Virtual Media redirection.
Save To save the configured settings.
Reset To reset the previously-saved values.
Procedure:
1. Select the number of Floppy devices, CD/DVD devices
and Hard disk devices from the dropdown list.
Note:
Maximum of two devices can be added in Floppy, CD/DVD and
Hard disk drives.
2. Enable the Local Media Support if needed.
3. Click Save to save the changes made else click Reset to
reset the previously saved values.
4-51
C G
ONFIGURATION ROUP
D
ESCRIPTION