Menu Selection Bar; Server Platform Setup Utility Screens - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

BIOS
Keyboard Commands (Continued)
K O
EY PTION
Pressing <F10> causes the following message
to appear:
Save and
<F10>
Exit
If Yes is highlighted and <Enter> is pressed, all
changes are saved and Setup is exited. If No is
highlighted and <Enter> is pressed, or the
<Esc> key is pressed, the user is returned to
where they were before <F10> was pressed
without affecting any existing values.

Menu Selection Bar

The Menu Selection Bar is located at the top of the BIOS Setup
Utility screen. It displays the major menu selections available to
the user. By using the left and right arrow keys, the user can
select the menus listed here.
D
ESCRIPTION
Save configuration and exit?
Yes No
Server Platform Setup Utility
Screens
The sections below describe the screens available for the con-
figuration of a server platform. In these sections, tables are
used to describe the contents of each screen. These tables fol-
low the following guidelines:
The text and values in the Setup Item, Options, and Help

columns in the tables are displayed on the BIOS Setup
screens.
Bold text in the Options column of the tables indicates

default values. These values are not displayed in bold on
the setup screen. The bold text in this document is to
serve as a reference point.
The Comments column provides additional information

where it may be helpful. This information does not appear
in the BIOS Setup screens.
Information in the screen shots that is enclosed in brack-

ets (< >) indicates text that varies, depending on the
option(s) installed. For example <Current Date> is
replaced by the actual current date.
Information that is enclosed in square brackets ([]) in the

tables indicates areas where the user needs to type in text
instead of selecting from a provided option.
Whenever information is changed (except Date and Time)

the systems requires a save and reboot to take place.
3-4
M S B
ENU ELECTION AR