Processors; Removing A Processor - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE

2.6. Processors

Removing a Processor

WARNING!
!
The processor remains hot after the system has been powered
down. Allow sufficient time to cool before handling system compo-
nents.
Prerequisite:
Remove the heat sink. See Removing a Heat Sink on
page 2-10.
1. Pull the locking lever of the processor socket out and up
as shown.
Releasing Locking Lever
2. Push down as shown in image to lift the processor
bracket.
Opening Processor Bracket
2-13
P
ROCESSORS