Installing A Fan Cage; Removing A Single Fan Module - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE

Installing a Fan Cage

Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-9.
1. Align the fan cage to the screw hole(s) on the chassis.
2. Install and secure the screw(s).
Installing Screws
3. Connect the fan cable(s).
Connecting Cables

Removing a Single Fan Module

Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Disconnect the fan cable.
Front
Disconnecting Cable
2-40
I F C
NSTALLING A AN AGE