Installing A 10Gbe Sfp+ Mezzanine Card Assembly - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE
Installing a 10GbE SFP+ Mezza-
nine Card Assembly
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Align the screw hole(s) on the mezzanine card with the
hole(s) on the assembly cover.
Installing Mezzanine Card to Assembly Cover
2. Secure mezzanine card to assembly cover with screw(s).
3. Install assembly into the chassis.
Installing SFP Card Assembly Screw(s)
4. Secure card assembly to the chassis with screw(s).
2-26
E C
XPANSION ARDS