Related Manuals for QUANTA S100-L11SL
Summary of Contents for QUANTA S100-L11SL
- Page 1 Quanta S100-L11SL 1U Server User's Guide Date Modified: October 18, 2012 5:15 pm Document Version: 1.0...
- Page 2 ONVENTIONS Conventions Several different typographic conventions are used throughout this manual. Refer to the following examples for common usage. Bold type face denotes menu items, buttons and application names. Italic type face denotes references to other sections, and the names of the folders, menus, programs, and files. <Enter>...
- Page 3 CRONYMS Acronyms [0.3.1] [0.3.1] EFINITION EFINITION A signal is deasserted when in the inactive state. Analog to Digital Active-low signal names have “_L” appended to the ACPI Advanced Configuration and Power Interface end of the signal mnemonic. Active-high signal names Deasserted have no “_L”...
- Page 4 CRONYMS [0.3.1] [0.3.1] EFINITION EFINITION IPMI Intelligent Platform Management Interface Unit of electrical resistance In-Target Probe Power Distribution Board 1024 bytes. Platform Event Filtering Keyboard Controller Style Platform Event Paging Keyboard, Video, Mouse PERR Parity Error Local Area Network Power-On Hours Liquid Crystal Display POST Power-On Self Test...
- Page 5 CRONYMS [0.3.1] EFINITION Server Management Mode Server Management Software SNMP Simple Network Management Protocol Serial Over LAN UART Universal Asynchronous Receiver/Transmitter Upper Critical Threshold User Datagram Protocol UNCT Upper Non-Critical Threshold UNRT Upper Non-Recoverable Threshold Watchdog Timer Word 16-bit quantity...
-
Page 6: Important Safety Instructions
AFETY NFORMATION Safety Information Important Safety Instructions Hazardous conditions, devices and cables: Hazardous elec- trical conditions may be present on power, telephone, and com- munication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and Read all caution and safety statements in this document before modems attached to the server before opening it. - Page 7 AFETY NFORMATION with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may bend or break.
-
Page 8: Revision History
Copyright © 2012 Quanta Computer Inc. This publication, ufacturer to notify any person of such revision or changes. -
Page 9: About The Server
About the Server Chapter 1... -
Page 10: System Features
BOUT THE ERVER NTRODUCTION 1.2. Introduction S100-L11SL is a 1U server with the following major features: Intel 82599 10Gb SFP+ (optional) Chipset System Features ® Intel C204 (Cougar Point) Features Processor S100-L11SL ODEL ® ® Intel Xeon processor E3-1200,E3-1200V2 & i3-2100 family,... - Page 11 BOUT THE ERVER YSTEM EATURES Features S100-L11SL ODEL (1) PCIe x8 G3(Ivy Bridge only) Low Profile, PCIe Expansion Slot MD-2 slot ® SW RAID Options Intel RSTe SATA RAID 0/1/10/5 HW RAID Options (4) Intel (Hartwell) 82574L RJ45 GbE ports ...
-
Page 12: Package Contents
BOUT THE ERVER ACKAGE ONTENTS 1.3. Package Contents (1) 1U server chassis (4) Dummy DIMMs (1) Power supply (1) Power cord Utility CD (Technical Guide included) Rail kit ... -
Page 13: A Tour Of The System
BOUT THE ERVER OUR OF THE YSTEM 1.4. A Tour of the System System Overview Component Overview ESCRIPTION 3.5” HDDs 12 3.5” hard disk drive (HDD) HDD board Fans Fan module Main board Fixed PSU Fixed Power supply unit (PSU) 2.5”... -
Page 14: System Front View
BOUT THE ERVER YSTEM RONT System Front View Control Panel Features (Continued) ESCRIPTION Green ON, link Green Blinking, LAN LAN 1 LED access Green ON, link Green Blinking, LAN LAN 2 LED access Amber Blinking: System Front View System Front View Critical failure: fan, voltage, temperature state FEATURE... -
Page 15: System Rear View
BOUT THE ERVER YSTEM System Rear View I/O Features Configuration System Rear I/O View System Rear View System Rear I/O View System Rear View EATURE ESCRIPTION EATURE ESCRIPTION NIC1/NIC2 1 G or 10G BASE-T RJ45 port Main power supply unit (PSU) NIC3/NIC4 1 G or 10G BASE-T RJ45 port Mainboard... -
Page 16: Power Subsystem
BOUT THE ERVER OWER YSTEM Power Sub-System LED Status Definitions LAN LED The system mainboard has one I350 or 82599EN (optional) Ethernet controller and two 1 GbE or one 10 GbE (optional) PSU to Mainboard Module Description ports. Each RJ45 connector has two built-in LEDs. See the fol- lowing illustration and table for details. -
Page 17: Hdd Led
LED S BOUT THE ERVER TATUS EFINITIONS Control Panel LED Control Panel LED Description (Continued) TATUS ESCRIPTION Control Panel LED Description Green S0 system power on. Power LED S4/S5 system power off TATUS ESCRIPTION LAN Link to NIC5(82599) or Blinking S1 Standby/Sleep. -
Page 18: Installation And Assembly Safety Instructions
Installation and Assembly Safety Instructions Chapter 2... -
Page 19: Installation Assembly Safety Instructions
NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS NSTALLATION SSEMBLY AFETY NSTRUCTIONS 2.1. Installation Assembly Safety Instructions Guidelines The power supply in this product contains no user-serviceable parts. Refer servicing only to qualified personnel. Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A product with more than one power supply will have a separate AC power cord for each supply. - Page 20 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES SAFETY STEPS: Whenever you remove the chassis covers to access the inside of the system, follow these steps: 1. Turn off all peripheral devices connected to the system. 2. Turn off the system by pressing the power button. 3.
- Page 21 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES For proper cooling and airflow, always reinstall the chassis covers before turning on the system. Operating the system without the covers in place can damage system parts. To install the covers: 1. Check first to make sure you have not left loose tools or parts inside the system. 2.
- Page 22 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES The system is designed to operate in a typical office environment. Choose a site that is: Clean and free of airborne particles (other than normal room dust). Well ventilated and away from sources of heat including direct sunlight. ...
-
Page 23: Safety Information
Safety Information Chapter 3... -
Page 24: Server Safety Information
AFETY NFORMATION ERVER AFETY NFORMATION 3.1. Server Safety Information Safety Warnings and Cautions To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warn- ings and precautions in this guide before installing or maintain- ing your server product. -
Page 25: Intended Application Uses
AFETY NFORMATION NTENDED PPLICATION Intended Application Uses Indicates do not touch fan blades, may result in injury. This product was evaluated as Information Technology Equip- ment (ITE), which may be installed in offices, schools, computer Indicates to unplug all AC power cord(s) to discon- rooms, and similar commercial type locations. -
Page 26: Site Selection
AFETY NFORMATION ELECTION Site Selection Equipment Handling Practices The system is designed to operate in a typical office environ- Reduce the risk of personal injury or equipment damage: ment. Choose a site that is: Conform to local occupational health and safety require- ... -
Page 27: Power And Electrical Warnings
AFETY NFORMATION OWER AND LECTRICAL ARNINGS Power and Electrical Warnings CAUTION! HEN REPLACING A HOT PLUG POWER SUPPLY UNPLUG THE POWER CORD TO THE POWER SUPPLY BEING REPLACED BEFORE REMOVING IT FROM THE SERVER CAUTION! HE POWER BUTTON INDICATED BY THE STAND BY POWER MARK , DOES NOT COMPLETELY TURN OFF THE SYSTEM... -
Page 28: System Access Warnings
AFETY NFORMATION YSTEM CCESS ARNINGS System Access Warnings CAUTION! HE POWER SUPPLY CORD ARE THE MAIN DISCONNECT DEVICE TO POWER HE SOCKET OUTLET MUST BE NEAR THE EQUIPMENT AND READILY ACCESSIBLE FOR DISCONNECTION CAUTION! O AVOID PERSONAL INJURY OR PROPERTY DAMAGE THE FOLLOW ING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING THE CAUTION! -
Page 29: Rack Mount Warnings
AFETY NFORMATION OUNT ARNINGS You are responsible for installing a main power disconnect for CAUTION! the entire rack unit. This main disconnect must be readily NLESS YOU ARE ADDING OR REMOVING A HOT PLUG COMPONENT accessible, and it must be labeled as controlling power to the ALLOW THE SYSTEM TO COOL BEFORE OPENING THE COVERS entire unit, not just to the server(s). -
Page 30: Other Hazards
(ESD) AFETY NFORMATION LECTROSTATIC ISCHARGE Other Hazards Reliable Earthing - Reliable earthing of rack-mounted equip- ment should be maintained. Battery Replacement Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). -
Page 31: Cooling And Airflow
AFETY NFORMATION THER AZARDS Cooling and Airflow CAUTION! AREFULLY ROUTE CABLES AS DIRECTED TO MINIMIZE AIRFLOW BLOCKAGE AND COOLING PROBLEMS OR PROPER COOLING AND AIRFLOW OPERATE THE SYSTEM ONLY WITH THE CHASSIS COVERS INSTALLED PERATING THE SYSTEM WITHOUT THE COVERS IN PLACE CAN DAMAGE SYSTEM PARTS O INSTALL THE COVERS Check first to make sure you have not left loose tools or... -
Page 32: Regulatory And Compliance Information
Regulatory and Compliance Infor- mation Chapter 4... -
Page 33: Electromagnetic Compatibility Notices
EGULATORY AND OMPLIANCE NFORMATION LECTROMAGNETIC OMPATIBILITY OTICES 4.1. Electromagnetic Compatibility Notices FCC Verification Statement Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected. (USA) Consult the dealer or an experienced radio/TV technician ... -
Page 34: Bsmi (Taiwan)
(CE D EGULATORY AND OMPLIANCE NFORMATION UROPE ECLARATION OF ONFORMITY Europe (CE Declaration of Con- BSMI (Taiwan) formity) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product This product has been tested in accordance too, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC). -
Page 35: Restriction Of Hazardous Sub- Stances (Rohs) Compliance
/ or stances (RoHS) Compliance take-back. ® Quanta Computer Inc. has a system in place to restrict the use of banned substances in accordance with the European Direc- tive 2002/95/EC. Compliance is based on declaration that... -
Page 36: Product Regulatory Compliance Markings
EGULATORY AND OMPLIANCE NFORMATION RODUCT EGULATORY OMPLIANCE ARKINGS 4.2. Product Regulatory Compliance Markings Product Regulatory Compliance Markings (Continued) This product is marked with the following product certification markings: BSMI Certifi- Product Regulatory Compliance Markings cation Num- R43039 Taiwan ber & Class A EGULATORY Warning EGION...