Installing The Inner Rail - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

R K A
AIL IT SSEMBLY

Installing the Inner Rail

Follow these instructions to install inner rail:
1. Slide the release tab to the open position and remove the
inner rail from the rail kit assembly.
Release Tab
Disassembling the Rails
2. Align and insert the holes on the inner rail into the pins on
the side of the chassis.
3. Slide the inner rail until the latch key on the rail locks and
is secure to the chassis.
Installing an Inner Rail
4. Secure the rail with screw(s).
5. Repeat the previous steps for the other side.
6-2
I R B
NSTALLING THE ACK RACKETS
Inner Rail