Figure 51 Snmp Community Management - Quantum DX3000 User Manual

Figure 51 SNMP Community
Management
Quantum DX3000 and DX5000 User's Guide
7 Under
New Community
A unique name in the
a
characters (a-z, A-Z), no special characters or blank spaces are
allowed
If no communities are defined, the DX3000/DX5000
Caution:
system is universally accessible through a "public"
community (read-only).
IP address in the
b
Mask edit box ends in a zero, the value in the IP address edit box
must also end in a zero
Subnet mask in the
c
A single community with an IP address or network mask
Note:
set to
0.0.0.0,
access control is disabled.
Chapter 3 DX3000 and DX5000 Remote Management
, enter the new community information:
field, the field holds up to 20
Name
field, if the value in the Network
IP Address
field
Network Mask
or left blank, indicates that IP-address-based
Remote Alerts
79