Enclosure Status Indicators - Compaq StorageWorks DS-BA370 Series User Manual

Table 2–6 Enclosure Status Monitoring (Continued)
Blowers •
•
•
For a detailed description of status LEDs, and specific error
conditions, see the applicable chapter for each component.

Enclosure Status Indicators

The primary elements of the enclosure status indicators are the
enclosure power supplies and blowers. Loss of either a dc voltage or a
blower creates an error condition. The enclosure notifies the user of
the problem by sounding an audible alarm and changing the status
LED displays. When the enclosure is mounted in a data center cabinet
or a departmental server cabinet, these two status LEDs might be
connected to LEDs on the front door. The location of the enclosure
status LEDs is shown in Figure 2–3 and Figure 2–4.
Operating the UltraSCSI Enclosure
Operation
Operating speed
Installation
UltraSCSI RAID Enclosure 2–13