Table of Contents
Advertisement
Operating the UltraSCSI Enclosure
Figure 2–3 DS–BA370 Status
LEDs Locations
1.
System OK LED
2–14 UltraSCSI RAID Enclosure
Figure 2–4 RA7000 Status LEDs Locations
1
2
CXO5751B
C
For Figures
ALLOUTS
2.
System fault LED
C
1 is the system OK LED and is green. Callout 2 is the
ALLOUT
system fault LED and is amber. One or both of these two LEDs can be
O
at any time.
N
When the green system OK LED is O
is operational. This LED can be O
redundant components (such as blowers or power supplies) are
functioning correctly.
If the amber system fault LED is O
components have an error or fault condition. To isolate an error
condition, observe the status LEDs on the EMU, PVA, power
supplies, disk drive SBBs, and array controllers. These component
status LEDs are discussed under Controller Shelf Status Indicators
later in this chapter. Table 2–7 lists possible enclosure status LED
displays.
1
2
, it indicates that the enclosure
N
as long as a minimum number of
N
, it indicates one or more
N
CXO5451C
Advertisement
Table of Contents
