Turning On the Subsystem
After completing subsystem assembly, expansion, or movement of
the subsystem, complete the procedure in Table 2–2 to turn it back
O
.
N
Table 2–2
Turning On the Subsystem Power
1.
If there are no expansion enclosures, go to step 2.
If there are expansion
enclosures, turn O
N
input boxes for each
expansion enclosure by
pressing I on each ac power
switch (C
1).
ALLOUT
2.
On the master enclosure,
turn O
all the ac input
N
boxes by pressing I on each
ac power switch
(C
1).
ALLOUT
3.
Verify the array controller places the subsystem into an operational
state.
Operating the UltraSCSI Enclosure
all the ac
1
2
UltraSCSI RAID Enclosure 2–7
CXO5488B