Table of Contents
Advertisement
Table C–1 Preliminary Procedures (Continued)
5.
Use the PROCOMM PLUS Setup Utility to establish the following
parameters for modem and protocol options:
Modem Options
General Options
Auto baud detect
Send init if CD high
Protocol Options
General Options
Abort xfer if CD lost
ASCII Protocol Options
Character pacing (millisec)
Line pacing (1/10 second)
Pace character
th
Strip 8
bit
CR translation (upload)
LF translation (upload)
6.
Insert the microcode disk into the disk drive. Copy the EMU
microcode file into a PC directory (for example,
C:\FLSH_011.HEX).
7.
Start the communications program.
Installing EMU Microcode
OFF
NO
NO
0
0
0
NO
NONE
NONE
UltraSCSI RAID Enclosure C–3
Advertisement
Table of Contents
