Table 4–6
Removing a PVA (Continued)
2.
If there are no expansion enclosures, go to step 3.
If there are expansion enclosures, press and hold the PVA standby
power switch (C
ALLOUT
master EMU initiates a power shut down on all enclosures.
3.
Press and hold the PVA standby power switch (C
master enclosure until the master EMU initiates a power shut down
on the master enclosure.
4.
Turn O
all the ac input
FF
boxes by pressing O on each
ac power switch
(C
1) on any
ALLOUT
expansion enclosure and
then the master enclosure.
Power Verification and Addressing
1) on an expansion enclosure until the
1
CXO6303A
ALLOUT
1
2
UltraSCSI RAID Enclosure 4–13
1) on the
CXO5488B