Rack Installation; Rack Mounting Kit; Installing The Storage Enclosure - Compaq StorageWorks Reference Manual

Rack Mounting Kit

The Rack Mounting Kit that ships with the StorageWorks by Compaq 3U Rackmount
Enclosure contains:
• A template to mark the rack for proper alignment of rack-mounting brackets.
• A cable management system consisting of a cable reel and cable rack bracket.
NOTE: You will need a Phillips screwdriver #2 to install the cable management system. You will
also need two M6 x 1.0-12L Phillips screws that came with your rack.
• A pair of spring-loaded rails.
NOTE: If you are using an Alpha "round hole" rack, you will need to obtain an optional
installation kit. See the Quick Specs on the Compaq website at
http://www.compaq.com/storage/siteindex.htm for part number and other option information.

Installing the Storage Enclosure

WARNING: To reduce the risk of personal injury or damage to the
equipment, be sure that:
•
•
•
•
•
StorageWorks by Compaq 3U Rackmount Enclosure Reference Guide
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack
installation.
The racks are coupled in multiple rack installations.
Only one component is extended at a time. A rack may become
unstable if more than one component is extended for any reason.

Rack Installation

3
3–1