Table of Contents
Advertisement
Assembling an UltraSCSI RAID Subsystem
Connecting Subsystem Cables
Configuring the Subsystem
B–10 UltraSCSI RAID Enclosure
Cabinet user documentation describes the cable routing, location, and
function. The cables involved might include:
•
Controller-to-controller
•
Controller-to-host
•
ECB-to-cache module
For a detailed description of the cable connection procedures and
cable routing, refer to the following publications:
•
Array controller documentation
•
DIGITAL StorageWorks UltraSCSI RAID Cabinet Subsystem
(DS–SW600 Series) Installation and User's Guide
•
Pedestal documentation
Refer to Chapter 2 for configuring the subsystem. Apply
configuration rules that pertain to the UltraSCSI subsystem being
assembled.
Turn O
the subsystem using Table 2–2.
N
Advertisement
Table of Contents
