Table 5-5 Shutting Down The Ultrascsi Subsystem - Compaq StorageWorks DS-BA370 Series User Manual

Table 5–5 Shutting Down the UltraSCSI Subsystem
1. Clear the cache module and shut down the array controller per the
array controller documentation.
2. If there are no expansion enclosures, go to step 3.
If there are expansion enclosures, press and hold the PVA standby
power switch (C
ALLOUT
master EMU initiates a power shut down on all enclosures.
3. Press and hold the PVA standby power switch (C
master enclosure until the master EMU initiates a power shut down
on the master enclosure.
4. If there are no expansion enclosures, go to step 5.
If there are expansion
enclosures, turn O
FF
ac input boxes for each
expansion enclosure by
pressing O on each ac power
(C 1)
switch
ALLOUT
5. Turn O all the ac input
FF
boxes for the master
enclosure by pressing O on
each ac power switch
(C 1)
.
ALLOUT
Single-Ended I/O Module
1) on an expansion enclosure until the
1
all the
1
.
2
UltraSCSI RAID Enclosure 5–11
CXO6303A
1) on the
ALLOUT
CXO5488B