Table of Contents
Advertisement
Single-Ended I/O Module
5–14 UltraSCSI RAID Enclosure
Table 5–6
Installing Two-Enclosure Subsystem
Cables (Continued)
10. On the expansion enclosure shroud, align the module that has Cable
A (C
A) attached with the Port 1 backplane connector.
ALLOUT
Gently insert the module and fully seat it. Use a screwdriver to
tighten the spring-loaded mounting screws.
6
5
6
5
11. Repeat steps 5 through 10 for the remaining SCSI buses (ports 2
through 6).
12. Turn O
the subsystem using Table 5–7 and verify that it is operating
N
properly.
4
2
3
1
A
4
2
3
1
CXO5840B
Advertisement
Table of Contents
